You Are Here:>> Home > Products > Electronic universal testing machine > WDW series microcomputer controlled elec
WDW series microcomputer controlled electronic universal testing machine (1-2 tons)
ProductName:WDW series microcomputer controlled electronic universal testing machine (1-2 tons)
Productdescribe:WDW series microcomputer controlled electronic universal testing machine (1-2 tons)

Product Name: WDW-50E/100E electronic universal testing machine

Tel: 157-0641-2833
Product overview:

Mainly applicable to the wire, rope, twine, wire winding, woven bag, safety belt, hard wire, drawing, film, stage metal wire, metal foil, placed fiber, paper, composite materials, prefabricated plate, wire, cable, glue, plastic pipe, spring, tape, then plugthe tensile, tearing test.

Double space door type structure of the universal testing machine, the standard forspatial tensile, compression, bending under tension and compression of space,space conversion. Testing machine is composed of four guiding posts, beams,girders, a workbench floor type frame, speed control system is mounted at the lower part of table. By the Japanese Panasonic AC servo motor speed control of high precision, wide range, stable performance by synchronous tooth belt reducer system drives the ball screw rotation, ball screw drive in the beam, the tensile device (or compression, bending and other auxiliary) to move up and down, the loading andunloading specimen. The structure of the frame has enough stiffness, and achieve efficient, smooth transmission. The main parts of a host electronic universal testing machine for processing in the machining center, to ensure the accuracy of the host.The ball screw is E5.

Standard test machine:

The number of the name WDW-50E WDW-100E

1 sets of host AC servo motor and system 1.5kW

1 sets of deceleration system

1 sets of software and control system

Ball screw 2 sets

1 sets of transformer

Load sensor 50KN 100KN 1

Extensometer YYU-10/50 1 only

Photoelectric encoder 2000 line 1

Computer Lenovo brand mainstream configuration 1

HP (A4 printer, inkjet printer) 1

Standard table computer 1

Tension with flat jaw 0mm ~ 7mm 1

Tension with round jaw Φ 14mm Φ 20mm Φ 20mm ~ ~ Phi 26m

Compression devices plate diameter Φ 100 plate diameter Φ 1201 se

1 sets of bending auxiliary span 500mm, supporting roller and pressure rollerdiameter 24mm span 500mm, supporting roller and pressure roller diameter 30mm

1 sets of random tool

1 sets of random file

Special report (the order) 7mm ~ 14mm flat jaw, 14mm ~ 20mm

1 sets of the round jaw than 4mm ~ Phi 14mm, Phi 14mm ~ 20mm diameter

Testing machine features:

(1) AC servo driver and servo motor, the performance is stable and reliable, with over-current, overvoltage, over speed, overload protection device. Speed ratio can reach 1:100000.

(2) with overload, overcurrent, overvoltage, displacement of upper and lower limit andemergency stop protection function.

(3) the electric control circuit with reference to international standards, in accordance with national testing machine electrical standards, strong anti-interference ability, to ensure the stability of the controller, the accuracy of experimental data.

Test machine technical parameters:

The technical name WDW-50E

Maximum test force (kN) 50

The maximum test load test force measurement range of 0.4%~100%

Test accuracy better than the test value of + 1% (precision is ± 0.5%)

The test force resolution of 200000 yards

Extended meter gauge (mm) 50

The maximum deformation measurement (mm) 10

Deformation measuring range (mm) maximum deformation 2%~100%

Deformation measuring relative error is better than the test value of ± 1% (precisionis ± 0.5%)

Displacement measuring relative error is better than the test value of ± 1% (precisionis ± 0.5%)

Displacement resolution (mm) 0.001

Displacement rate adjustment range (mm/min) 0.005~500, stepless speed regulation

Displacement rate relative error of indication is better than the test value of ± 1%(precision is ± 0.5%)

Host size (mm) of 945 × 654 × 2186

Test space width (mm) 575

Stretching stroke (mm) 600

The compression stroke (mm) 600

The maximum stroke beam (mm) 1150

The host quality (kg) 700

The host power supply 1.5kW, AC380V ± 10%, three-phase four wire

Work environment temperature of 10 ℃ ~ 35 ℃, relative humidity 20% ~ 80%